Tips to prevent premature wear of your flooring products

Here are a few tips on how to extend the life of your carpets:

  • Use good quality of matting and use a combination of wiper and scraper matting.
  • Remove the ice melter deposits daily with a specialized cleaner such as Vert-2-Go Storm Rinse.
  • Remove ice and snow at all entranceways frequently.
  • Do not overuse ice melter. More is not necessarily better.
  • Keep a wet/dry vac near your entranceways to remove excess moisture from your entrance mats.

Implement a daily and interim cleaning program for your floors, mats and carpets. Your Wood Wyant Account Manager could help you on this.

Understanding the different types of autoscrubber brushes so that you can make an informed choice

It’s important to choose an autoscrubber that will best meet the needs of your business. Understanding the different types of brushes available on the market can help.

Rotary Ideal for cleaning flat, smooth floors. Most widely used type of scrubber. A flat pad or a disc brush spins as cleaning solution is dispensed on the floor. Lowest cost of ownership.
Cylindrical Great for uneven and debris-laden floors. No pre-sweeping needed. No separate broom/dust mop needed.
Orbital Powerful scrubbing action makes it the best choice for deep cleaning. Cleans grout and removes impurities in floor finishes. Can also be used to remove commercial floor finishes without chemicals. Rectangular cleaning head makes cleaning corners, along walls and other hard-to-reach areas easier.

4 Steps for Flawless Floors – Even During the Winter!

Snow. Slush. Salt. Ice melters. These are all sure signs that winter has arrived. These signs also bring all the salt, sand and moisture that inevitably make their way into buildings – increasing not only the risk of damage to floor surfaces, but also the risk of nasty slips and falls.

Here are 4 tips to lower these risks:

  • Install high performance matting at all entrances.

Good matting can trap 70% to 80% of the dirt tracked inside. For optimal dirt trapping, mats should be at least 15 ft (3.5 m) long.

  • Frequently review your floor care program.

To remove the 20% to 30% of dirt that manages to sneak past matting, you will probably need to increase your cleaning frequency during cold weather months.

  • Choose equipment that promotes good indoor air quality.

Opt for equipment that efficiently removes and traps dirt and contaminates. This will help to keep your indoor air clean.

  • Choose certified green cleaning chemicals.

People spend more time indoors during the winter, so cleaning products should also promote good indoor air quality. Look for certified green cleaning chemicals. They will offer the cleaning performance you need while also protecting the health of users and building occupants.

How to Properly Maintain Floor Pads

Floor pads generally take a lot of abuse. There are plenty of reasons for this: Improper storage, wrong size of pad used, wrong type of products used for the type of pad, wrong type of pad used for the floor surface… the list goes on and on.

Here’s how to keep floor pads in good condition longer.

These tips may seem simple, but they will make a big difference in improving results and reducing costs.

  1. ALWAYS use the right floor pad for the job. There are different floor pads for different tasks, so be sure to use the right one.
  1. Use the right size floor pad. Using the wrong size of pad for your machine can cause it to break down and even shorten its operating life. An improperly fitted floor pad will also tend to wear out more quickly.
  1. Always install pads properly. An off-centre floor pad can wear unevenly or tear.
  1. Clean pads after using them. They’ll last longer, which will save you money over the long run.

Pro tip: If you’re unable to clean floor pads right after using them, seal them in a plastic bag to keep them damp until you’re able to clean them.

How to Wash Your Hands like a Pro!

Your hands are literally crawling with germs and bacteria. On any given day, you probably touch hundreds of objects. No wonder germs spread so quickly! Did you know that the average office worker touches roughly 30 objects each and every minute? That same person also touches his or her face 18.5 times each hour. That adds up to a very high risk of catching a virus!

Stop spreading viruses: Follow these handy tips for washing your hands properly.

Wash your hands often:

  • Before, during and after preparing food
  • Before eating
  • Before and after taking care of a sick person
  • When your hands are visibly dirty
  • After going to the bathroom
  • After coughing, sneezing or blowing your nose
  • After handling pet food or litter
  • After handling garbage
  • After sharing a cell phone or other electronic device

Pro tip:

Keep hand sanitizer on hand at all times. Simply rub your hands vigorously for 15 seconds to remove 99.99% of bacteria – no water needed!

Go to Top